Categories
Engineering

Program: Civil Engineering – Transportation Need to design a transit service net

Program: Civil Engineering – Transportation
Need to design a transit service network through using Google Earth and calculate/estimate multiple different costs and details related to the network in Microsoft Excel. Willing to pay more as it’s not much of a essay, rather design and calculations. Doesn’t necessarily have to be 6 pages, as long as all components of the assignment are met. Down below is the criteria and attached is the assignment data. If any other details are needed, please let me know!
P.S – To open the Medicine Hat Transit Map file, Google Earth needs to be downloaded.
The City of Medicine Hat in Alberta is looking to redesign its current transit system. As such, the city has approached our class to develop transit routing options and estimate costs and funding for a new transit service to start in the year 2024.
Your responsibilities will be to do the following:
Create a transit service network for the City of Medicine Hat based on data provided in the word document and the kmz file above
Write a memorandum to the City of Medicine Hat Councilors justifying your transit system network, classifying/explaining each specific routing and how your network meets the standards set out in the above word document. Be sure to include issues you faced in terms of land-use planning or road connections, etc. that make it difficult to create an ideal network
Estimate the operator and km costs of each of your routings as per your instructions in class based on details in the provided word document
Estimate proposed ridership based on details provided in the word document
Estimate the proposed passengers per route per hour by averaging them out over each bus on the route
Calculate the proposed revenue and then the R/C ratio
Write conclusions on why your system is the best for the City of Medicine Hat and whether they should purchase the 18 proposed buses or more/less based on your calculations. (Note; be sure to use your interlining knowledge in order to save buses if possible, especially in the peak hour)
The student(s) must also submit an excel file or hand written calculations outlining all the above. I would HIGHLY suggest you use excel as: it’s easier, you should get experience using it for employment and if you make a change to a route after calculations, it’s simple to adjust compared to hand written calculations. The excel file should be organized such that I will be able to understand how your calculations were undertaken with minimal effort. Marks will be deducted if I cannot easily ascertain your calculations.
Please note, that when designing a transit network, there is no “right” answer. Some networks are better than others, but the chosen network should be thoroughly justified, through explanations to town council. Students should remember that as transit planners, we are responsible to all local taxpayers, and not just the taxpayers who use the service.
Please also note that Medicine Hat transit service does exist currently and you can find the routings on the Internet. Please DO NOT look for this service information until after you have completed your transit network. Their current service network is not the ‘right answer’ for this project and I would argue that it would be a ‘wrong answer’ as the information I have provided above is not based in reality and any proposed service map would not help you with this assignment. Additionally, if you look at any proposed service, you will become focused on the paths those routings follow and have difficulty being creative on your own.
Please see below for a 20 minute video tutorial using Google Earth, the first 11 minutes explain how to work Google Earth and draw/modify routes. The second portion of the video explains how to save your files and typical issues that students encounter as saving isn’t the most intuitive:
https://cdnapisec.kaltura.com/index.php/extwidget/preview/partner_id/1345362/uiconf_id/44669531/entry_id/1_fm88yhlb/embed/dynamic

Categories
Engineering

as a structural civil engineer select 2 practices from below. We want to use the

as a structural civil engineer select 2 practices from below. We want to use these ideas to make A building at Penn State Harrisburg called Olmstead LEED-certified. select the 2 practices from below and provide a full review of what they are, how they work, and how they are considered sustainable practices to help PSH. Note: no design (sizing, cost estimate etc) is needed.
Here are the practices.
Public Electric Transport: Campuses, particularly big campuses, can invest in public electric
transport to reduce the use of private vehicles. Although this technology requires a higher
capital cost, it offers significant economic and environmental benefits because of reduced
maintenance, use of alternative power, and fewer greenhouse gas emissions.
 Plastic Recycling Facilities: Aside from discouraging single-use plastic, the campus can also
invest in plastic recycling facilities. The campus can set up more recycling bins and partner with
recycling facilities to recycle plastics collected from students, faculties, and other staff.
 LED Lights: Traditional lights should be replaced with energy-efficient LED lighting. LED lights
reduce energy consumption by 40%, which can help the campus save on energy costs.
 Solar Power: The campus should also start investing in renewable energy sources. Solar panels
can be installed in different areas on campus to make sustainable energy cheaper and more
accessible. Although the installation requires a budget, it brings more benefits, like a constant
source of renewable energy.
 Carbon Capture and Storage: Instead of focusing on completely decarbonizing the campus, the
campus can develop a system that safely captures carbon emissions and permanently store
them. By storing carbon emissions, they no longer contribute to damaging the environment.

Categories
Engineering

as a structural civil engineer select 2 practices from below. We want to use the

as a structural civil engineer select 2 practices from below. We want to use these ideas to make A building at Penn State Harrisburg called Olmstead LEED-certified. select the 2 practices from below and provide a full review of what they are, how they work, and how they are considered sustainable practices to help PSH. Note: no design (sizing, cost estimate etc) is needed.
Here are the practices.
Public Electric Transport: Campuses, particularly big campuses, can invest in public electric
transport to reduce the use of private vehicles. Although this technology requires a higher
capital cost, it offers significant economic and environmental benefits because of reduced
maintenance, use of alternative power, and fewer greenhouse gas emissions.
 Plastic Recycling Facilities: Aside from discouraging single-use plastic, the campus can also
invest in plastic recycling facilities. The campus can set up more recycling bins and partner with
recycling facilities to recycle plastics collected from students, faculties, and other staff.
 LED Lights: Traditional lights should be replaced with energy-efficient LED lighting. LED lights
reduce energy consumption by 40%, which can help the campus save on energy costs.
 Solar Power: The campus should also start investing in renewable energy sources. Solar panels
can be installed in different areas on campus to make sustainable energy cheaper and more
accessible. Although the installation requires a budget, it brings more benefits, like a constant
source of renewable energy.
 Carbon Capture and Storage: Instead of focusing on completely decarbonizing the campus, the
campus can develop a system that safely captures carbon emissions and permanently store
them. By storing carbon emissions, they no longer contribute to damaging the environment.

Categories
Engineering

Its a literature review about three peer reviewed articles that I have chosen an

Its a literature review about three peer reviewed articles that I have chosen and attached focusing in the energy sector and sustainability. The first three paragraphs need to be the literature reviews, while the 4 is the critical evaluation, and 5th conclusion. Ive provided slides covering the questions that need to be answered in the reviews, critical evaluation and conclusion. My work is in the PDF called “publish”. documents “1” and “2” and the imagine provide instructions. Articles 1, 2, 3 are the things Im supposed to be reviewing.

Categories
Engineering

Can you please write the answer as a report and the maximum number of pages is 10 pages and i have answered the questions but can you write the report and use the slides to reference the foundings

Can you please write the answer as a report and the maximum number of pages is 10 pages and I have answered the questions but can you write the report and use the slides to reference the foundings

Categories
Engineering

Reach out to me if you need anymore recourses

please see the attached files for instructions.
the answer should be included the comments and codes. Reach out to me if you need anymore recourses

Categories
Engineering

The answer should be included the comments and codes.

please see the attached files for instructions.
the answer should be included the comments and codes. Reach out to me if you need anymore recourses

Categories
Engineering

Describe why the use of day lighting to illuminate interior spaces is more complicated than simply opening a window.

Pick 3 : Provide a comprehensive answer to three of the following questions (1 page each minimum).
Use citations and external sources to support your conclusions as needed.
1. Discuss Toyota’s stance on “Sustainable Development” and “Return on Investment”. Relate this to the fundamental principles of Green Building Design.
2. Discuss why, despite the United States limited history (i.e. established in 1776), our nation has become a global technological / economic / political power. Detail our responsibility toward promoting sustainable construction and curtailing resource consumption.
3. Describe how both architecture design and engineering of buildings has changed over the last century as a result of modern technology. Describe how green engineering is now attempting to embrace “natural energy saving” design elements.
4. Describe why the use of day lighting to illuminate interior spaces is more complicated than simply opening a window. Describe the architectural and engineering challenges faced to provide natural lighting within a given structure.

Categories
Engineering

The drawings also have to be edited.

I submitted an essay to my uni. My teacher gave a bad grade and had a lot of feedback to it. Its research paper in building engineering. Its also needed to draw in AutoCad for it.
See Paper details, my paper and the feedback I received.
Use my paper as base but implement all the feedback en paper details. Somethings have to be redone. The drawings also have to be edited.

Categories
Engineering

Include discussion of any research experience you have had.

– Instruction: A typewritten personal statement indicating the basis of your interest in graduate study and your career objectives. Include discussion of any research experience you have had. Also mention here which faculty members you would be most interested in working with and why. A separate personal statement on diversity, equity, and inclusion in science is optional. Specifications include Times New Roman, 12 point font, 0.5 inch margins, one page single-sided.
– File attached is not formatted per instruction (font) – please match the format/page layout and leave as little white space as possible of 1 page limit
– More talking points to fill in the white space are below:
1) I have been in the upper limb rehabilitation industry for a decade now and this gave me plenty of opportunity to define user needs and collect feedback from patients and practitioners.
I have a clear idea of what is lacking in clinical settings that future research can help.
2) I have experience in translational research – multiple NIH funded projects I was involved in led to a product launch.
This includes continuation of my master’s thesis which is now integrated to IBT’s pattern recognition system.
3) I started my BME Master’s project with Stroke rehabilitation then switched to upper limb prosthesis rehabilitation as I found what I am passionate about.
I have finished my preliminary research, experiment, analysis, and thesis writing all within a year and have graduated from a competitive Master’s program.
Moreover, I already met the credit requirements besides seminar/ethics courses, which will enable me to focus on an independent research project.
4) I am proactive, organized, and responsible. Working in a small company, I learned to figure out what I need to do instead of relying on others to tell me what to do.
I also have experience putting logistics together for a grant proposal with up to 7 collaborators (Haptix project in 2014), which requires organizational skill.
Moreover, I always deliver what is promised and never fall short. I know how to utilize resources, collaborate, and resolve intellectual conflict with others for the best outcome.
I believe these are important traits to demonstrate that I am a qualified candidate for consideration into the Ph.D. program.